SDS Download

Shipping info

Impact Base Sealer Impact eliminates the need for regular stripping and will last for an extended period of time depending on environmental wear factors. Impact is best used as a base coat for Brilliance Sealer finish where a buffable finish is required for ultra-high gloss. 🗸 Non-yellowing and UV resistant 🗸 A semi permanent seal containing excellent leveling properties 🗸 Resistant to scratching and scuffing DIRECTIONS FOR USE Preparation: If required remove any old finishes using Zip Strip or Xpoly8 for acrylic seals, or Fabrisolv for solvent type seals. Clean the surface then rinse area and allow to dry. If surface has any marks or oil residues (i.e. concrete), scrub surface with Tempo HD to remove marks prior to sealing and then rinse area thoroughly and allow to dry. Please Note: Always seal a small test section of floor to ensure proper surface adhesion before sealing entire floor surface. APPLICATION: As a One-Step Sealer: Apply 2-5 coats of IMPACT using a polish applicator. Allow drying time of 20 – 30 minutes (under normal conditions) or until the coat is no longer tacky between coats. Can be buffed to enhance gloss.
Order in the next [hour] to get it between [date_start] and [date_end]

Pickup available at 1 Hilton Avenue

Usually ready in 24 hours


  • 1 Hilton Avenue

    Pickup available, usually ready in 24 hours

    1 Hilton Avenue
    Sydenham NSW 2044


$88.00 AUD
  • Apple Pay
  • Google Pay
  • Mastercard
  • Shop Pay
  • Visa

Guarantee safe & secure checkout

Frequently bought together

Cleaning Essentials