Xpoly8 is a low odour, fast acting and labour saving method for removing floor sealers/finishes with minimal scrubbing. Xpoly8 is a new generation floor stripper designed to rapidly liquefy and emulsify old sealers for easy removal with an auto-scrubber or mop and bucket. Xpoly8 is a powerful dual action floor stripper designed to remove metalized and non-metalized floor finishes. Xpoly8 contains a blend of glycol solvents that synergise with a rapid penetration dual chain emulsifier to penetrate the most stubborn old polish films.

DIRECTIONS FOR USE:

Depending upon the degree of sealer on the floor, XPOLY8 can be diluted as follows:

Heavy Build up: 250mL/L of water

Moderate Build up: 125mL/L of water Add recommended amount of XPOLY8 to cold water and apply liberally to the floor. Allow to work for 3 to 5 minutes, being sure to keep the floor wet.

CAUTION: Floor will be slippery when it’s wet. Scrub the floor using a black pad. Pick up the dissolved sealer. Rinse the floor with clean water and allow the floor to dry